(2012)

- SPECIAL ORDER APPROX 7 DAY DELIVERY

Tubing Specifications
» Chain Stays: 22.2mm hourglass round shaped and tapered.
» Down Tube: 40mm reinforced gusseted down tube, greater head tube strength and stiffness
» Head tube: traditional lightweight (Non-Integrated) 11/8" externally and internally CNC machined
» Seat Stays: 17mm hourglass round shaped and tapered.
» Seat Tube: 32mm round shaped with internal 27.2mm sleeve.
» Top Tube: 32mm horizontally ovalized to create extra lateral stiffness (Size 52-58cm)
» Top tube: 34.9mm vertically ovalized to create extra lateral stiffness (Size 60cm)

Component Sizing
» Compatible with either V-Brake, Cantilever Brake, or Disc Brake Systems
» Frame Utilizes 27.2mm seat post diameter / Recommended length = 400mm
» Frame Utilizes 31.8mm / 1 ¼” front derailleur clamp
» Frame utilizes a 31.8mm / 1 ¼” seat post clamp
» Frame Utilizes a 68mm English threaded bottom bracket
» Frame utilizes a traditional 11/8” head set
Frame Features
» 132.5mm rear axle Spacing to allow use of MTB or Road hubs
» CNC machined & slotted integrated shifter cable guides with 8-point detent
» CNC machined 68mm English threaded bottom bracket
» CNC machined and sculpted chain stay bridge
» CNC machined and tapered cable stops
» CNC machined sculpted 7mm thick titanium dropouts.
» Extended seat tube increases stand over height while creating a smaller and stiffer front triangle
» Fender mounts (chain stay bridge boss, seat stay bridge boss)
» Optimal size specific tubing (Larger diameter tubing used on larger size frames).
» Seat stay and drop out rack mounts
» Van Nicholas chemicaly etched head tube badge

Frame Finish
» Hand brushed finish. No paint or clear coat